Publicidad
Idiomas disponibles
Idiomas disponibles
A
WARNING:
To prevent accidental
starting
that could cause serious personal
injury, always disconnect
the sander from the power source when assembling
parts, making adjustments,
installing or removing sandpaper,
cleaning,
or when
it is not in use.
TURNING
THE SANDER
ON/OFF (Fig. 2)
To turn on the sander, connect the plug to an electrical outlet, and depress the
side of the rocker switch marked "F.
To turn it off, depress the side of the rocker switch marked "O'.
LED WORKLIGNT
(Fig. 2)
The LED worklight,
located in the
front of the tool, will turn on when
the rocker switch is in the ON (l)
position. This provides
additional
Bighting on the surface of the
workpiece
for operation.
The LED
worklight
will turn off when the
switch
is in the OFF (O) position.
THE LIVE=TOOL INDICATOR
LIGHT (Fig. 3)
The sheet sander is equipped
with
a Bive=tool indicator Bight. When the
tool is plugged
into an electrical
supply, the live=tool indicator light
will illuminate green to remind you
that the tool is plugged
in. When
the tool is unplugged,
the indicator
light will turn off.
Fig. 2
Fig. 3
On/Off rocker
switch
LED worklight
I-
Live-tool
I
indicator
light
12
Publicidad
