Celexon MultiCel LuxusLine OMG-1000 Manual De Instrucciones página 18

Fig. 5: Mounting the bracket to the projector
STEP 4: FINAL ASSEMBLY ON THE CEILING
7. After you have connected the mounting arms to the projector, slide the
long or short telescopic tube (D) into the main tube (B) that has already been
mounted on the ceiling. (If you have decided to use the short version, unscrew
the decorative ring and the locking screw from the long pipe and use them for
the short main pipe). Then tighten the locking screw for height adjustment (C).
Please only carry out this step with a second person!
After installation, please check all screws again to ensure that they are tight
to prevent the projector or bracket from falling down unintentionally and to
prevent accidents.
Fixation Height
adjustment
Fig. 6: Mounting the projector
7