Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Before using the appliance, it is recommended to clean all parts that will come into
contact with foodstuffs, using a damp cloth. Dry well.
Do not place in the dishwasher or submerge in liquids.
DESCRIPTION OF DISPLAY SYMBOLS
SYMBOL
lb
Unit of weight indicator: pounds
Indicator of unit weight: grams
g
fl'oz
Unit of weight indicator: fluid ounces
oz
Unit of weight indicator: ounces
Unit of weight indicator: millilitres
ml
Tare indicator
Tare
-
Negative weight or volume (when tare is selected)
O-ld
Overload indicator
Weight reset indicator
0
Flat battery indicator
DESCRIPTION OF BUTTONS
UNIT: to select the Weight/Volume lb/g/fl'oz/oz/ml function
ON/TARE: ON/OFF, ZERO/TARE
INSTRUCTIONS FOR USE
1. Open the lid of the battery compartment under the scale.
2. Insert 2 x UM3/AAA batteries (not included), making sure the polarity is correct, then close the lid.
3. Place the scale on a flat and stable surface.
4. Place the bowl or any other container on the weighing platform before turning it on.
5. Press the "ON/TARE" key to turn the appliance on.
6. The display will show "18.8.8.8." for about 2 seconds, then "0"; the scale is now ready to weigh.
7. To change the unit of measure, as soon as "0" appears on the display, press the "UNIT" key to select
lb/g/oz/fl'oz/oz/ml.
8. Place the food to be weighed on the platform; the display will show the measured weight.
HELPFUL TIPS:
•
If nothing appears when the scale turns on, check that the batteries have been inserted correctly. If
the problem persists, the batteries may be flat; if so, replace them with new ones of the same type.
•
Always wait for "0" to appear on the display before placing the food to be weighed on the weighing
platform.
•
Press the "ON/TARE" key to turn the appliance off. Otherwise, the appliance will turn off automatically
after about 90 seconds.
REPLACING THE BATTERIES
When the flat battery symbol (Lo) appears on the display or the measured values are inaccurate, replace the
batteries.
1. Open the lid of the battery compartment under the scale.
2. Remove the flat batteries and replace them with two new UM3/AAA type batteries. Close the lid.
DESCRIPTION
14
Publicidad
