Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
5, putting 2 silver screws (with their
washers) in the holes that are aligned
in the two pieces.
• Note: Check image 06 on page 5 to
see how the two pieces are joined
together (the two ends are opposite, not
continuous)
• Screw these with a Philips screwdriver.
Repeat the process for the other two
metal structures.
• Tip:
Do not tighten the first screw
completely until the other two are also
in place.
• Once these two connections have been
completed, use 4 screws (for each metal
union with their washers) to attach
them to the outdoor unit, and screw
them with a Philips screwdriver. See
image 07 on page 6:
• Place the rubber dampers on the bottom
back part. See image 08 on page 6.
• Finally, once the metal structures have
been assembled and attached to the
outdoor unit, introduce the loose ends
in the outward pieces of the indoor
unit back part and secure them by
introducing the manual screws (with
the black five sided head) in the aligned
holes of the union. Tighten these by
hand. See image 08 on page 6.
• If you wish you can put the protective
cover on the connecting pipe between
the two machines, to have a better
protection
when
elements (wrap up the pipe and secure
the cover with the Velcro fastening)
• Install the whole unit on the window
(it is recommended that more than one
person do it) and manually secure the
brackets properly so that it is steady
and to prevent it from moving, falling
and/or deteriorating.
Close the window (there will be a slight
opening because of the connecting cable,
which is inevitable) and connect the
appliance in your caravan. See image 10 on
page 6.
INSTRUCTIONS FOR USE
Please consider the following indications
24
exposed
to
the
to optimize the operation of this air
conditioner:
• Improve the thermal insulation of the
vehicle; In order to do so, cover any
open gaps and put reflective blinds or
curtains on the windows.
• If the vehicle has been exposed to the
sunlight for a long period: first use
the "Air circulation" mode of the air
conditioner for a while, keeping the
windows open, before selecting the
"Cooling" mode
• Avoid opening doors or windows
unnecessarily while using the "Cooling"
mode.
• Select a suitable temperature and fan
speed.
• Direct the air nozzles properly
• Make sure the air nozzles and the
intake louver are not covered with
cloths, paper or any other object.
WI-FI CONNECTION
lnstall App
Download the "Smart life" app from the
Play Store (Android) or App Store (iOS), or
scan the QR code. See picture 11 on page 7.
Register
lf you do not have a "Smart Life" account,
register or sign in with a verification code
sent by SMS.
To register:
• Tap to enter registration page
• The system automatically recognises
your country / area. You can also select
your country code manually. Enter your
mobile phone number/ email address
and tap "Next".
• lf you choose the mobile phone number
option, then enter the verification code
in the message sent to you by SMS.
Set a password as prompted and press
"Confirm" to finish your registration.
Adding a network device
To access the explanatory video about this
connection, go to image 17 on page 7 and
scan the QR code with your smartphone.
Publicidad
