Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
in which the appliance is located
corresponds to that which appears on
the nameplate of the appliance and that
the plug is correctly connected to an
earth socket.
• Assembly and installation must be
carried out by a competent technician,
who is responsible for the proper
functioning of the appliance in the
place of installation.
• The appliance must be installed in a
space suitable for it, taking into account
its dimensions and its needs, such
as water inlets and outlets, electrical
connections, etc.
• It may be necessary to modify the space
where the appliance is installed to
allow access to the different ducts.
To be sure appliance is installed properly,
please help with picture 2 of page 5.
12. Back
13. Mains cable
14. Water inlet
15. Drain pipe
16. Pipe position B
17. Pipe position A
18. Counter
The exact position of the individual
elements may vary depending on the
layout and dimensions of the existing
installation space.
• Once the pipes are connected and the
appliance is plugged in, the power can
be turned on and the appropriate water
connection must be opened for the
appliance to function properly.
Cold water connection (see image 8 on
page 8)
Connect the cold water supply hose to a
threaded 3/4(inch) connector and make
sure that it is fastened tightly in place.
If the water pipes are new or have not been
used for an extended period of time, let the
water run to make sure that the water is
clear. This precaution is needed to avoid
the risk of the water inlet to be blocked and
36
damage the appliance.
Water outlet
Connect the water drain hose. The drain
hose must be correctly fitted to avoid wáter
leaks. Ensure that the water drain hose is
not kinked or squashed.
Extension hose
If you need a drain hose extension, make
sure to use a similar drain hose.
It must not be longer than 4 meters,
otherwise the cleaning effect of the
dishwasher could be reduced.
Syphon connection
The waste connection must be at a height
less than 1000 mm (maximum) from the
bottom of the dishwasher.
POSITIONING AND LEVELLING
• Position the appliance in the desired
location. The back should rest against
the wall behind it, and the sides, along
the adjacent cabinets or walls. The
dishwasher is equipped with water
supply and drain hoses that can be
positioned either to the right or the left
sides to facilitate proper installation.
• Levelling the appliance: Once the
appliance is positioned for levelling,
the dishwasher may be altered via
adjustment of the screwing level of the
feet. In any case, the appliance should
not be inclined more than 2°. (See
image 9 on page 8)
Free standing installation (See image 10
on page 8)
The height of the dishwasher, 845 mm,
has been designed in order to allow the
machine to be fitted between existing
cabinets of the same height in modern
fitted kitchens. The feet can be adjusted so
that correct height is reached.
The laminated top of the machine does
not require any particular care since it is
heatproof, scratchproof and stainproof.
Underneath existing work top (See image
11 on page 8)
(When fitting beneath a work top) In most
Publicidad
