Notes On The Electrical Connections - Waeco PerfectView Instrucciones De Montaje Y Uso

_RV-33.book Seite 38 Donnerstag, 30. November 2006 1:41 13

Notes on the electrical connections

The camera consists of the following elements:
No. in
fig. b,
page 7
1
2
3
4
6 Notes on the electrical connections
6.1 Laying cables
Note
I
As far as possible, use original ducts for laying the cables, or other
suitable options, such as panelling edges, ventilation grilles or
dummy plugs. If no openings are available, you must drill holes for
the cables. Check beforehand that there is sufficient space on the
other side for the drill head to come out.
Note
I
Cables and connections that are not properly installed will cause
malfunctions or damage to components. Correct installation of
cables and connections ensures lasting and trouble-free operation
of the retrofitted components.
Caution!
a
The cables may not be exposed for long periods to solvents such
as benzene, since solvents can damage the cable.
38
Description
6-pin connection cable
Microphone
Long-distance lens
Close-up lens (reversing camera)
PerfectView