SAFETY PRECAUTIONS
Prior to use, read the safety precautions carefully to ensure proper use . The precautions listed here are described under
classification of Warnings and Cautions, and are intended to prevent harm or damages to users and other persons . All of these
precautions are critical in terms of safety . Follow them at all times .
Graphic symbol indications: Indicates content that could lead to death or injury if handled incorrectly .
CAUTION
PROHIBITED
Disassembly prohibited.
•
Do not disassemble, repair, or modify . Doing so can cause fire, electric shock, or injury .
•
Repair by persons other than trained repair technicians can be dangerous .
•
Warning: To reduce the risk of fire or electric shock, do not use this product with any solid-state speed
control device .
Product use.
•
Use on a level, stable floor . Placing product on uneven and unstable floors can cause the product to fall over,
leading to injury or damage to property in the vicinity of the product .
•
Place the product in locations where it will not get entangled in curtains or hoisting strings, etc . Failing to do
so can cause damage to articles near the product .
•
Always grasp the power plug to unplug it, do not unplug it by pulling on the power cord . Pulling on the power
cord can damage it, which can cause fire or electric shock .
•
Always unplug the power plug from the electrical outlet when the product will be unused for extended periods
of time . Failing to do so can lead to fire or electric shock caused by short-circuits due to reduced insulation .
•
This product employs overload protection (fuse) . A blown fuse indicates an overload or a short-circuit . If the
fuse blows, unplug the product from the outlet . Replace the fuse as per the user servicing instructions (follow
product marking for proper fuse rating) and check the product . If the replacement fuse blows, a short-circuit
occurred and the product should be discarded or returned to IRIS USA, Inc . for inspection and/or repair .
Unplug.
•
Unplug the power plug from the electrical outlet when performing maintenance, inspecting, or moving the
product .
•
This appliance has a polarized plug (one blade is wider than the other) . To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse
the plug . If it still does not fit, contact a qualified electrician . Do not attempt to defeat this safety feature .
•
Grasp the plug and remove from the receptacle or other outlet device . Do not unplug by pulling on the cord .
Use power plugs and power cords correctly.
•
Failing to do so can cause fire or electric shock due to short-circuits .
•
Insert the power plug securely all the way into the electrical outlet .
•
Regularly remove dust from the power plug .
•
When dust is allowed to build up, insulation is hampered due to moisture, which can cause fire or electric
shock .
•
Use only 120 V~ . Other current/voltage can cause fires .
•
Do not use if the power cord or the power plug is damaged, or if the power plug is loose when plugged into
the electrical outlet . Doing so can cause fire or electric shock due to short-circuit .
•
Do not run the cord under carpeting . Do not cover the cord with throw rugs, runners, or similar coverings . Do
not run the cord under furniture or appliances . Arrange the cord away from high traffic areas and where it
will not be tripped over .
•
Do not operate any fan with a damaged cord or plug . Discard fan or return to an authorized service facility
for examination and/or repair .
Do not damage the power cord.
•
Damaging, modifying, forcefully bending, pulling, twisting, putting heavy objects, or pinching can damage
the power cord, which can cause fire or electric shock .
•
Do not use if the power cord is bundled up . Doing so can cause fires . Always extend the cord out before
using .
INSTRUCTIONS THAT MUST BE FOLLOWED
1
•
Do not pull on the power cord when carrying or storing the product . Pulling on the power cord can cause fire
or electric shock .
•
To avoid electric shock, fire or hazard, if the prower cord is damaged, discard the fan or return it to IRIS USA,
Inc . for inspection/or replacement .
Abnormalities and malfunctions can cause smoke, fire, or electric shock.
Stop use immediately, cut power, and unplug from the electrical outlet when abnormalities or malfunctions occur .
Examples of abnormalities
•
Abnormal sounds or odors .
•
Power plug or power cord become abnormally hot .
•
Loss of power, etc . when power cord is moved .
•
The product periodically stops during operation .
•
Tingling sensation from electric current felt when the product is touched .
•
Stop use and contact IRIS USA, Inc . customer service at 1-800-320-4747 .
Avoid fire hazards.
•
Do not spray with insecticides, hair sprays, or lubrication oils, etc .
•
Do not use near flammable substances (kerosene, gasoline, paint thinner, etc .), objects that have flames
(cigarettes, incense, etc .) or combustible materials . Can cause fires .
•
Do not use the product with air flow pointed at a combustible appliance such as a heater . Doing so can cause
incomplete combustion or scatter flames, which can cause carbon monoxide poisoning and fire .
Wet hands prohibited.
•
Do not unplug power plug when hands are wet .
Do not use the product outdoors.
•
Do not use in the vicinity of objects that obstruct the flow of air .
•
Do not operate while covered or blocked with cloth, paper, or plastic bags, etc .
•
Do not use in locations where there is a lot of dirt or dust . This can cause short-circuit or fire .
•
Do not use in rooms with high humidity levels such as bathrooms .
•
Do not get the unit wet, or put the unit in water . Getting the product wet can cause fire or electric shock .
If handled incorrectly, contents can lead to personal injury or physical damage.
•
Keep out of reach of children and infants .
•
Do not climb on or tip the product over . Doing so may lead to injury or electric shock .
•
Do not drag the product when moving it . Dragging product can damage carpet and floors .
•
Do not point air flow directly at your body . It generates a very strong air flow .
•
Be especially mindful not to allow children or elderly people near product . Being near the product can be
harmful to their physical condition and to their health .
•
Air blowing directly on plants may be harmful .
•
Do not operate without attaching the
vane
or the cover . Doing so can cause injury, electric shock, or fire .
•
Do not strike the unit forcefully . Doing so can cause the product to malfunction, leading to fire or electric
shock .
User servicing instructions.
•
If the fuse on your fan has blown, grasp the plug and remove it from the outlet . Do not pull the cord to unplug .
•
To open, slide the fuse cover towards the prongs of the plug .
•
Carefully remove the old fuse and snap the replacement fuse into place . To reduce the risk of fire, only
replace the fuse with another fuse of the proper rating (2 .5 A, 125 V~) . Slide the fuse door back into place to
close . Discard the blown fuse . The plug should now be ready for normal use .
•
To reduce the risk of fire, do not replace the attachment plug if it is damaged . Only the fuse should be
replaced . Discard the product if the attached plug is damaged .
•
If you need further information on how or when to replace the fuse in plug, contact IRIS USA, Inc . customer
service at 1-800-320-4747 .
2