cecotec CONGA ASH 2000 COMPACT Manual De Instrucciones página 43

3. ASSEMBLY AND OPERATION
Fig. 3
1. Install the high efficiency filter on top.
2. Set the upper part of the vacuum cleaner on the tank.
3. Set the flexible hose in the suction opening.
4. Install the desired nozzle on the other end of the flexible hose.
5. To start vacuuming, switch on the appliance and press the power switch.
6. If you want to use the blowing function, simply connect the flexible hose to the relevant
hole.
7. Always unplug the appliance after each use.
4. CLEANING AND MAINTENANCE
Fig. 4
1. Open the dust tank.
2. Remove the high-efficiency filter.
3. Shake the dust out of the high-efficiency filter to clean it.
4. Empty the dust tank.
5. Wash the high-efficiency filter with clean water if necessary.
6. Please note: Before reinstallation, be sure to dry the high efficiency filter completely if it
has been previously washed with water.
7. Put the filter and canister back in place inside the vacuum cleaner.
WARNING:
The surface of the device may only be cleaned with a dry or damp cloth.
5. TROUBLESHOOTING
Problem
The motor does not
start
Possible cause
The power cord is not
-
plugged into a socket.
The power socket is
-
damaged.
The vacuum cleaner was
-
not switched on.
Conga Ash 2000 Compact/ 3000 Compacto Plus/4000 Advance
Solution
Properly plug in the device.
-
Check that the socket is not
-
damaged.
Switch the device on.
-
ENGLISH
43