Publicidad
Idiomas disponibles
Idiomas disponibles
Before
Each Start-Up:
1.
Place On/Auto/Off
lever to
"OFF" and close air regulator.
2.
Pull regulator knob out, turn
counterclockwise
until it stops.
Push knob in to lock in place.
3.
Attach hose and accessories.
NOTE: The hose or accessory
will require a quick connect plug
if the air outlet is equipped with a
quick connect socket.
Risk of Bursting.
Too much air
pressure
causes a hazardous
risk
of bursting.
Check the
manufacturer's
maximum
pressure
rating for air tools and accessories.
The regulator
outlet
pressure
must
never exceed the maximum
pressure
rating.
How to Start:
1.
Turn the On/Auto/Off
lever to
"AUTO" and allow tank pressure
to build.
Motor will stop when
tank pressure reaches "cut-out"
pressure.
2.
Pull the regulator knob out and
turn clockwise to increase
pressure. When the desired
pressure is reached push knob in
to lock in place.
The compressor
is ready for use.
15-ENG
D30085
Publicidad
