Publicidad
1. Standards
EN/IEC 61347-2-11: 2001
EN 55015: 2013
EN 61000-3-2: 2014 Part 3-2
EN 61000-3-3: 2013 Part 3-3
EN 61547: 2009
EN 62386-101 Ed.2.1
1.1 Glow-wire test
according to EN 61347-2-11 passed for temperatures up to 850 °C.
2. Common
2.1 Functional description
DALI PS3 is developed according to EN 62386-101 Ed.2.1 also known as
DALI-2. DALI PS3 is a power supply, rated at 16 V DC and providing 70 mA.
With the provided 70 mA current up to 35 DALI loads can be connected.
Standard DALI loads are specified to consume max. 2 mA.
Some DALI control devices may consume more than 2 mA (e.g.
MSensor G3). If such devices are connected to the PS3 the amount of
possible connected devices will be reduced.
This has to be considered during the application design.
Up to 2 PS3 can be connected in parallel to provide up to 140 mA.
Additional PS3 must be connected in parallel and the polarity has to
be considered. Do not connect more than 2 PS3 in one installation.
This may cause damage to the device and all other devices
connected to the control wires.
The housing provides mounting flaps (manually removable) which can be
used for easy installation inside a luminaire.
3. Installation
• DALI signals are not SELV. Therefore the same procedures should be
applied as working with mains voltage.
• The DALI signal wires must not drop more than 2 V.
3.1 Wiring
L
N
DALI
LED Driver
PS3
+ –
DALI
�
�
�
DALI
TOUCHPANEL
BASIC
* Possible connection of additional DALI PS3
3.2 Cable types and cable cross-sections
For wiring, stranded wire with ferrules or solid wire with a cable cross-section
of 0.2–1.5 mm² can be used.
Data sheet 02/22-CO114-8
Subject to change without notice. Information provided without guarantee.
Lighting Controls and Connectivity
DALI-2 components
DALI
LED Driver
PS3*
+ –
DALI
DALI
XC
USB
Strip 8.5–9.5 mm of insulation from the cables to ensure perfect operation of
the push-wire terminals.
Use one wire for each terminal connector only.
wire preparation:
0.2 – 1.5 mm²
8.5 – 9.5 mm
When loosing the wiring, always use the push-button handle and
never pull on the wire until the letch is released.
3.3 Max. output cable length
Material
Copper
Aluminium
1
Cable lengths of more than 300 m are not recommended.
3.4 Output short circuit conditions
Output short circuit behavior has no delay, retry and restart period of
shutdown mechanism, but short circuit proof. The PS3 keeps working even
output is short with limited max. output current.
4. Thermal details and lifetime
4.1 Expected lifetime
Expected lifetime
Type
DALI PS3
The device is designed for a lifetime stated above under reference
conditions and with a failure probability of less than 10 %.
5. Miscellaneous
5.1 Disposal
According to the WEEE directive return old equipment at appropriate
collection facilities.
5.2 Additional information
Additional technical information at www.tridonic.com → Technical Data
Guarantee conditions at www.tridonic.com → Services
Lifetime declarations are informative and represent no warranty claim.
No warranty if device was opened.
www.tridonic.com
Cross-
Max. cable length
section
25 °C
50 °C
0.20 mm²
45 m
41 m
0.50 mm²
112 m
102 m
0.75 mm²
168 m
153 m
1.00 mm²
224 m
204 m
1
1
1.50 mm²
300 m
300 m
0.20 mm²
27 m
25 m
0.50 mm²
68 m
62 m
0.75 mm²
102 m
93 m
1.00 mm²
136 m
125 m
1.50 mm²
205 m
187 m
ta
40 °C
50 °C
tc
55 °C
65 °C
Lifetime
>100,000 h
100,000 h
75 °C
37 m
93 m
140 m
187 m
281 m
23 m
57 m
86 m
115 m
172 m
65 °C
75 °C
65,000 h
3
Publicidad
