Allen + Roth LENOIR MC-W Instrucciones De Montaje página 6

INSTALLATION GUIDELINES
ASSEMBLY INSTRUCTIONS
1. Measure the height at where the cabinet will be
located, as illustrated. It is recommended to leave
at least 4" (102 mm) clearance between the wall
and the cabinet to ensure the full opening of the
door.
2. Plus 17 13/16" (453mm) to the height, this
calculated measure is the distance of the bottom
of the support bar to the floor, as illustrated
below. Mark the bottom position of the support
bar on the wall.
When installing this product, the
screws should reach the wood studs
behind the plasterboard wall.
It is not recommended to install on
a plasterboard wall if the screws and
anchors are not secured in the wood
studs.
1
2
6
D
Support bar