Publicidad
Idiomas disponibles
Idiomas disponibles
PICTURE IN PICTURE (PIP) OPERATION
PIP Operation with a VCR - No Cable Box
This television includes a Picture In Picture (PIP) feature.
А second video
source (VCR) is required to provide a second picture.
Connect your television to a VCR, as shown.
(Some models have only one
video input and some models have an S-VIDEO input.)
TERMINALS
ON BACK OF TV
VCR
(may vary)
LLU
a
INCOMING
CABLE
|
ANTINPUT |
AUDIO — VIDEO
|
O) |
ALL
"aP
VIDEO OUT
S-VIDEO
CABLES NOT SUPPLIED
Note:
The Remote Control must be programmed with the supplied codes
to operate the VCR.
See Programming the Remote Control in the
Remote Control Quick Reference Guide.
Procedure
"Turn the VCR OFF and tune the TV to channel 3.
Press the PIP button on the Remote Control to display the PIP frame
on screen.
Note:
The PIP picture is the same as the Main picture, initially.
.
Press the TV/VIDEO button on the Remote Control to select
the VIDEO PIP source.
.
Press the VCR button on the Remote Control and turn ON
the VCR.
|
.
Press the TV/VCR button on the Remote Control.
°
Choose
channels
for
PIP
frame
by
pressing
VCR
CHANNEL up/down buttons on the Remote Control.
.
Choose channels for the Main Picture by pressing the TV
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
v|
Bc
SWAP Button
>
The
SWAP
button
switches
the PIP
and
Main
Picture source.
Press the RECALL
button for on
screen PIP and Main Picture source status.
Publicidad
