Descargar Imprimir esta página

cecotec FORCECLIMA 7150 STYLE Manual De Instrucciones página 38

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
ENGLISH
Air outlet pipe assembly
Temporary installation. Fig. 11
1. Screw the adapter, hose connector and window connector to the ends of the exhaust hose.
2. Insert the adapter into the openings at the back of the appliance.
3. Place the other end of the exhaust hose on the windowsill.
Window kit installation. Fig. 12
1. The kit can be positioned vertically or horizontally. Check the minimum and maximum size
of the window before installing it.
2. Place the kit in the window.
3. Adjust the length of the kit according to the width or height of the window and fix it with
the dowel.
4. Insert the window connector of the hose to the hole on the window kit.
NOTE:
-
The flat end of the exhaust hose joints must be snapped into place.
-
The air outlet pipe must not be twisted or bent more than 45°. Keep the air outlet pipe free
of obstructions.
The following checks must be applied to installations using flammable refrigerants:
-
The load size is in accordance with the size of the room where refrigerant-containing parts
are installed.
-
Ventilation machinery and outlets can be properly operated and are unobstructed.
-
If an indirect cooling circuit is used, the secondary circuit must be checked for refrigerant
presence.
-
Equipment marking remains visible and legible. Illegible markings and symbols should be
corrected.
-
The components or refrigerant piping are installed in a position where they are not
susceptible to exposure to any substance that may corrode the refrigerant-containing
components, unless the components are made of materials that are inherently resistant
to corrosion or are properly protected against it.
4. OPERATION
The following functions can be activated from the control panel or from the remote control.
On/Off
When the appliance is switched on, it will beep and enter Standby mode. Press the on/off
button to switch the appliance on and off.
74
FORCECLIMA 7150 STYLE / FORCECLIMA 7550 STYLE CONNECTED/ FORCECLIMA 9150 STYLE
FORCECLIMA 9450 STYLE HEATING / FORCECLIMA 9550 STYLE HEATING CONNECTED/ FORCECLIMA 12650 STYLE HEATING
FORCECLIMA 12850 STYLE HEATING CONNECTED
Modes
Press the mode button to switch between cool mode, heat mode (depending on the model), fan
mode and dehumidification mode.
Sleep mode
-
When the appliance is in operation with the cool mode activated, press the sleep mode
button to adjust the temperature. The temperature shall increase by 1 °C after one hour
and by a maximum of 2 °C after 2 hours.
-
When the appliance is in operation with the heat mode activated, press the sleep mode
button to adjust the temperature. The temperature shall decrease by 1 °C after one hour
and by a maximum of 2 °C after 2 hours.
-
Press the button again to deactivate sleep mode.
Increase and decrease
Use these buttons to increase or decrease temperature and operation time.
Temperature cannot be increased or decreased in fan or dehumidification mode.
Fan speed
In cool mode, press this button to select a high or low fan speed setting.
This option is not available under the dehumidification mode.
NOTE:
Under certain conditions (defrost), it may not operate at the selected speed.
Timer
To set the switch-on time
-
When the air conditioner is off, press the timer button and select the desired switch-on
time using the temperature and time setting buttons.
-
"Preset ON Time" will appear on the control panel.
-
You can select that the appliance switches on automatically within a period of 0 to 24
hours.
-
Press the timer button again to confirm the settings and activate the function.
-
To deactivate this function, press the timer button repeatedly until the indicator light turns
off.
To set the switch-off time
-
When the air conditioner is on, press the timer button and select the desired switch-off
time using the temperature and time setting buttons.
-
"Preset OFF Time" will appear on the control panel.
-
You can select that the appliance switches off automatically within a period of 0 to 24
hours.
FORCECLIMA 7150 STYLE / FORCECLIMA 7550 STYLE CONNECTED/ FORCECLIMA 9150 STYLE
FORCECLIMA 9450 STYLE HEATING / FORCECLIMA 9550 STYLE HEATING CONNECTED/ FORCECLIMA 12650 STYLE HEATING
ENGLISH
75
FORCECLIMA 12850 STYLE HEATING CONNECTED

Publicidad

loading