Publicidad
Idiomas disponibles
Idiomas disponibles
FAN INSTALLATION
4. Insert blade arm (H) through the slot it on the
fan motor assembly (F) than align holes and
tighten each blade arm screw (DD). Repeat
these steps for the remaining blade arms (H).
Hardware Used
DD
Blade Arm Screw
5. Insert downrod (D) through canopy (B), canopy
bottom cover (C) and coupling cover (E).
Thread wires from fan motor assembly (F)
up through downrod (D).
6. Slip downrod (D) into collar, align holes and
re-install clevis pin and cotter pin. Tighten
two set screws in collar.
4
x 6
5
6
Collar
Cotter Pin
Set Screw
9
Slot
Set Screw
Clevis Pin
Publicidad
