Publicidad
Idiomas disponibles
Idiomas disponibles
eet ee Ne a
es
Welcome
!
Thank you for purchasing the Sony
WM-FX511/513
Radio Cassette
Player.
Some features are:
«LCD Menu function that lets you
select and switch functions in the
display window of the main unit.
* AMS (Automatic Music Sensor)
function that searches the
beginning of the current and 2
previous tracks, and succeeding 3
tracks at high speed.
* Useful remote control (FX513)
>Getting Started
—
Sn
aI
Preparing a Power
Source
Choose either dry battery or house
current as the power source.
For the tourist model, the supplied
rechargeable battery can be used.
a
Dry Battery (see Fig. EJ-©)
1
Open the battery compartment
lid, and insert an R6 (size AA)
dry battery (not supplied) by
matching the + and - on the
battery to the diagram inside
the battery compartment.
When to replace the battery
(see Fig. EJ-©)
Replace the battery with a new one
when the BATT lamp dims.
Battery life
Sony
Sony
alkaline
R6P
LR6 (SG) (SR)
ao
Ee
Tape playback
15
3.5
Radio reception
22
af
For maximum performance we
recommend that you use an alkaline
battery.
Notes
* Do not charge a dry battery.
¢ When you do not use the Walkman
for a long time, remove the battery
to avoid any damage caused by
battery leakage and subsequent
corrosion.
I
Rechargeable Battery
(see Fig. EN-©) (Tourist
model only)
1.
Set the voltage selector to the
correct position with the right
operating voltage using a
screwdriver, etc.
2
Insert the supplied
rechargeable battery (NC-AA)
for the tourist model only into
the charger with correct
polarity.
(Approx. hours).
3.
Plug in the charger to the wall
outlet.
Full charging takes about 4
hours.
If the plug does not fit your
mains, attach the supplied AC
plug adaptor (for the tourist
model only).
4
Insert the fully charged battery
into the battery
compartment
(see Fig. EN-@).
When to charge the battery
(see Fig. EJ-©)
Charge the battery when the BATT
lamp dims. You can charge the
battery about 300 times.
Battery life
(Approx. hours)
Rechargeable battery (NC-AA)
Tape playback
6
Radio reception
8.5
Notes
* Do not tear off the film on the
rechargeable battery.
* Use the Sony NC-AA rechargeable
battery only with the supplied
battery charger (for the tourist
model only).
¢ Do not leave the charger plugged in
for more than 20 hours. Overcharging
may damage the rechargeable
battery.
* The battery charger and the
rechargeable battery may become
warm during charging, but it is not a
problem.
oS
House Current (mains)
(see Fig. EN-@)
Connect the AC power adaptor
(AC-E15HG not supplied) to the DC
IN 1.5 V jack and to the mains. Do
not use any other AC power
* adaptor.
Polarity of
the plug
Connecting the
Headphones
(see Fig. E]-@)
1
Connect the headphones to
OREMOTE (FX513) or 0
(FXS11).
You can put the longer
headphone cord behind your
neck.
To use the supplied clip
(FX513) (excluding the U.S.A.
mode!)
(see Fig. E]-©)
Position the headphones cord
through the guides on the supplied
clip as shown. Fasten the clip to
your clothes.
For the customers in the
U.S.A.
The supplied headphones are
different from those explained and
illustrated above.
Releasing HOLD
(see Fig. [)
The HOLD function locks the
Walkman and the remote control
separately to prevent them from
operating when you accidentally
press a button. Unlock it before
operating.
1 Slide HOLD in the opposite
direction of the arrow on the
Walkman, or slide HOLD on
the remote control so that the
yellow HOLD indicator is
hidden.
To lock the Walkman
:
Slide HOLD in the direction of the
arrow on the Walkman, or slide
HOLD on the remote control so that
the HOLD indicator turns yellow.
> Operating the
Walkman
a
Playing a Tape
(see Fig. B)-@)
The Auto tape selector
automatically selects the tape
(normal (TYPE 1), CrO2 (TYPE II) or
metal (TYPE IV) ) for playback.
1
Insert a cassette.
2
Press <> *REPEAT to start
playing then adjust the volume.
When adjusting the volume on
the Walkman (FX513)
Set the VOL control on the remote
control at maximum.
When adjusting the volume on
the remote control (FX513)
Set the VOL control on the Walkman
to around 6.
To
We
Fig.
)
Play the other side
= <4 *REPEAT
during
playback
Stop
playback
a
Fast forward
FF* AMS
during
sto
Rewind
REW*AMS
during
sto
Repeat the track
<> °*REPEAT
you are listening to _ for two seconds
(Repeat Single
or more during
Track function)
playback
To stopa
single repeat,
press it again.
Find the beginning
= FF* AMS once/
of the next track/
repeatedly
succeeding 3 tracks
during
(AMS"*)
layback
Find the beginning
REW*AMS
of the current track/
once/
previous 2 tracks
repeatedly
(AMS)
during
playback
Play the same side
= REW*AMS
from the beginning
for two
{Auto Rewind
seconds or
Play function)
more during,
stop
Play the other side
FF* AMS
for two
from the beginning
— seconds or
(Skip Reverse
more during
function)
stop
* Automatic Music Sensor
Note on Beeps during AMS
operations
* The beeps differ in relation to the
track number being searched. When
finding the beginning of the next 3
tracks during AMS operations,
beeps "* -- ~" (beep followed by
three long beeps) are emitted
repeatedly. Likewise, when finding
the beginning of the previous 2
tracks, beeps "« * -——" are emitted
repeatedly. While the remaining
tracks are reduced, the number of
long beeps are reduced accordingly.
To skip a long blank space
between musics, (BL SKIP*
function) (see Fig. B}-©)
Press MENU repeatedly to set the
cursor to BL SKIP in the display.
Then press SET to show "ON".
* The Walkman fast forwards the tape
to the next track if there is a blank
space longer than 12 seconds.
To select playback mode
(see Fig. [8)-©)
Press MENU repeatedly to set the
cursor to MODE in the display.
Then press SET to select the desired
mode.
i
To pla
Select
Both sides repeatedly
ca
Both sides once
a)
from the side facing
the cassette holder
Note on AMS, REPEAT Single
Track and BL SKIP
* To operate the AMS and the
REPEAT Single Track functions, you
need a blank of 4 seconds or longer
between the tracks. For the BL SKIP
function, you need a blank of 12
seconds or longer. Therefore, if there
is noise between the tracks, these
functions will not detect the blank
and will not operate. Likewise, if the
recording level is moderately low
within a track, these functions may
inaccurately operate.
To play a tape recorded with
Dolby NR system
(see Fig. B)-©)
Press MENU repeatedly to set the
cursor to 00 NR (Dolby noise
reduction) in the display. Then
press SET to show "ON".
(turn over)
Publicidad
