asalvo TRONA ACTIVITY Manual De Instrucciones página 12

2. Insert the two stud bolt of
the base into the hole of the
right chair feet, then insert the
stud bolt of the foot rest into the
hole of the right chair feet (see
fig. 4) Buckle the chair feet, use
the screwdriver to tighten the
plastic screw up, use the same
way to tighten the plastic screw
at the reverse side (see fig.5)
3. Insert the plastic screw bar of table and crossbar into the hole of left
table base (see fig. 7), and buckle the right table stand (see fig. 8). Use the
screwdriver to tighten the plastic screw bar up, and use the same way to
tighten the plastic screw at the reverse side (see fig. 9)
EN
INsTALLATION Of THE CHAIR
INsTALLATION Of THE TAbLE
Right table
stand
Left table
base
Table
Crossbar