Descargar Imprimir esta página

MPM MZE-23 Manual De Instrucciones página 28

Ocultar thumbs Ver también para MZE-23:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
4. Wipe off residues or other contaminants from the iron soleplate with a damp cloth
using a non-abrasive, liquid detergent
CAUTION! Never immerse the iron in water or rinse it under the tap.
WARNING! Do not use a wire brush or other scrubbing objects. Do not use strong
detergents to clean the iron.
5. Wipe the base of the iron with a damp cloth.
SELF-CLEANING
1. Fill the water tank according to the instructions in the 'water tank filling' section.
2. Place the iron in a safe position to avoid burns from hot water.
3. Connect the device to power and turn it on with the button (7).
After completing the warm-up (the blue indicator has stopped flashing and is lit steadily), hold down
the cleaning button (6) for 3 seconds.
The device will emit a triple sound, and the indicator light (1) will start flashing. Cleaning takes about
2 minutes.
After the self-cleaning is completed, the iron will beep three times.
FINISHING WORK
1. Disconnect the power cord from the electrical outlet.
2. Wait for the iron and iron base to cool down.
3. Empty the water tank (1).
4. The base of the device has been built in such a way that it is possible to wrap the power cord
and connecting cord in a specially prepared place.
5. Fold the connecting cable in half and wrap it in a clockwise direction.
6. Wrap the power cord counterclockwise around the groove in the base, then insert the plug
between the power cord and the connecting cable.
SPECIFICATIONS:
The technical parameters are provided on the nameplate of the
product. Length of power cord: 1.8 meters
Length of connecting cord: 1.55 meters
The symbol placed on the product indicates that the product should not be disposed of with other household
waste after the end of its service life. Used equipment may have harmful impact on the environment and
human health due to the potential presence of hazardous substances, mixtures, and components. Mixing e-
waste with other waste or its unprofessional dismantling can lead to the release of substances harmful to
health and the environment. Used equipment should be delivered to a collection point for used electrical and
electronic equipment. For detailed information on where to dispose of electrical and electronic waste, users should
contact the municipal collection point or a facility for processing used equipment.
WWW.MPM.PL
User manual
7

Publicidad

loading