Beurer BG 17 Manual De Instrucciones página 16

Table 4
For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between portable and mobile RF communications equip-
ment and the BG 17
The BG 17 is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the BG 17 can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmit-
ters) and the BG 17 as recommended below, according to the maximum output power of the communi-
cations equipment.
Rated maximum output power
of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation dis-
tance d in meters (m) can be determined using the equation applicable to the frequency of the trans-
mitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Separation distance according to frequency of transmitter
80 MHz to 800 MHz
d =
0.117
0.368
1.167
3.689
11.667
16
m
800 MHz to 2.5 GHz
d =
0.233
0.737
2.333
7.37
23.333