cecotec STEELMILL TOUCH Manual De Instrucciones página 4

SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
- The appliance can be used by people with reduced physical,
sensory, or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the device in a safe way and understand
the hazards involved.
- The appliance is not intended to be used by children. Keep
this appliance and its power cable out of their reach.
- Children must not play with the appliance. Cleaning and user
maintenance should not be carried out by children.
- Check the power cable regularly for visible damage. If the
power cord is damaged, it must be replaced by Cecotec, our
after-sales service, or similar qualified personnel to avoid
risks.
- WARNING: incorrect or improper use can be dangerous for
both the device and the user. Use the appliance only for the
purposes described in this manual.
- Be careful with the blades when emptying and cleaning the
product.
- The blades inside the product are very sharp, handle them
carefully to avoid cuts.
- Unplug the appliance from the mains when not in use or
when cleaning, before disassembling, or assembling the
product. Allow it to cool down completely before attaching
or removing parts and before cleaning the appliance.
- Switch off and unplug the appliance before changing
accessories or related parts that move during use.
- Ensure that the mains voltage matches the voltage specified
on the device rating label and that the plug is earthed.
6
STEELMILL TOUCH
- Do not twist, bend, pull, or damage the power cable. Protect
it from sharp edges and heat sources. Do not allow the cable
to touch hot surfaces. Do not let the cable hang over the
edge of the working surface or worktop.
- Never leave the appliance unattended during use.
- Do not use accessories not provided or suggested by
Cecotec, as these could cause damage to the appliance or
result in hazards.
- Do not connect the device to the power supply unless fully
and safely assembled.
- Do not exceed the MAX mark.
- The device is only suitable for grinding coffee beans. Do not
use it to grind any other type of food.
- To avoid overheating the motor, do not use the flat grindstone
system for more than one minute at a time.
- Let the device rest for one minute after using it twice in
succession. Do not perform more than two grinding cycles
at a time.
- Do not move the appliance during operation.
7
STEELMILL TOUCH