Mark LIGHT TRUSS BAT 41 Manual Del Usuario página 6

ADVANCED USE
RECARGABLE BATTERY
The unit can operate with the internal battery after to be charged. The process is automatic while the
device is connected to an adequate AC plug. You can check the charge level through LED bar closed
the switches.
For battery use, press Battery Switch. For AC connect operation press both switches (Battery switch and
Power switch)
LIGHT TRUSS BAR 41 can be configured in different ways thanks to its panel and selection buttons.
LIGHT TRUSS BAR 41 incorporates a remote controller which includes the basic
functions:
- Colour change
- Automatic modes
- Speed control
CONTROL PANEL
Press the MENU button (once or several times) until you get to the
desired function (according to the following chart), and press ENTER
to confirm your selection.
Use the UP & DOWN buttons to navigate between each function to
select the correct value. (Press ENTER to confirm the setting).
5