Mark LIGHT TRUSS BAT 41 Manual Del Usuario página 9

Program speed (When
Program 2 to 8 are
activated)
5 R dimming
6 G dimming
7 B dimming
8 W dimming
CAUTIONS
Prevention of electric shock
The electrical connection must only be carried out by qualified personal. Before installing, make sure
you use the same power voltage marked in the LIGHT TRUSS BAR 41 (AC 240V/50-60Hz). Each device
must be properly grounded and installed in accordance with the relevant standards. Don't use the
device in a lightning storm or wet environment.
To prevent burning of fire
1. Never install the device directly on the surface of ordinary combustible material.
2. The equipment must be installed away from inflammable and explosive materials.
3. Keep at last 0,5 m around the unit for ventilation purposes.
4. Do not place any object on the lens.
5. Do not replace with non-original spare parts. Contact your MARK PRO dealer.
Unpacking
Note: Before unpacking, check it for possible damage that might have occurred during transportation.
If you find any damage, please do not use the unit and contact the MARK PRO dealer.
Orange
Turquoise
Speed from slow to fast
Red dimming from minimum to maximum
Green dimming from minimum to maximum
Blue dimming from minimum to maximum
White dimming from minimum to maximum
216 -
237
238 -
255
0-255
0 - 255
0 - 255
0 - 255
0 - 255
8