Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION - General information
The following description is part of the image on page 2:
1. Temperature controller
2. Pan
3. Glass lid
BEFORE USING
1. Remove the packaging and remove the film from the food divider before use.
2. Clean all accessories to remove any residue from the manufacturing process (see "Cleaning
and Maintenance").
3. Mount the glass cover (3) and the knob (4) as shown on page 2.
ATTENTION:
•
The first time you use the appliance, light smoke and a particular odour may develop. This is normal
and will disappear on its own. Ensure sufficient ventilation.
•
To use the food divider, place it in the pan before adding the different foods you wish to prepare. Allow
the appliance to cool off before removing the food divider and thoroughly clean it before storing it.
USE
1. Insert the thermostat completely into the socket of the pan, see page 2.
Note: Only the supplied cord with thermostat may be used.
3. Insert the plug into the wall socket.
3. Set the desired temperature using the temperature controller:
Level 1 = approx. 115°C
Level 2 = approx. 155°C
Level 3 = approx. 175°C
Level 4 = approx. 185°C
Level 5 = approx. 220°C
4. If necessary, grease the bottom of the pan with a little oil.
5. Put the food you want to prepare in the pan.
6. Prepare the food until it is cooked. Turn the food over every now and then so that it is gradually cooked.
7. Remove the food from the pan and place it on a plate. Be careful though! The food is hot.
8. Turn the thermostat control knob to the "0" position.
9. Unplug the appliance and then unplug the temperature control.
ATTENTION:
•
The metal pin on the thermostat may be very hot.
•
The indicator led on the thermostat will light up to indicate that the heating element is switched on. After
a few minutes, the indicator light will turn off. Once the indicator light is out, the appliance has reached
the required temperature and is ready for use.
•
Do not use forks, knives or other sharp objects! This can damage the non-stick coating.
CLEANING AND MAINTENANCE
Clean the unit after each use.
1. Unplug the appliance, allow it to cool completely and remove the thermostat from the socket.
2. Clean the pan and the base with a damp cloth and, if necessary, some detergent.
3. Thoroughly dry the pan and base.
4. Make sure that the appliance is not connected to the mains power supply when cleaning it.
5. Do not use harsh or abrasive cleaning agents or sharp objects (such as knives or hard brushes) when cleaning.
6. Never immerse the socket, thermostat, plug and cord in water or any other liquid.
4. Button
5. Handles
6. Cable and plug
14
14
EN
EN
Publicidad
