Publicidad
Idiomas disponibles
Idiomas disponibles
14 OPERATION
Operating the Air Purifier
Start/Stop
Turns the product on and off.
• Press the Start/Stop button.
NOTE
• The most recently used mode is saved if the
power supply is cut off as a result of a power
failure.
• After the product is turned on, the sensor
calibrates for approximately 30 seconds.
Adjusting the Fan Speed
You can adjust the fan speed from the air purifier.
1
Press the Start/Stop button to turn on the
product.
2
To adjust the fan speed, press the Speed
button.
• When you press the button during product
operation, the fan speed changes in the
order of Auto
~
Turbo.
~
Low
Medium
High
~
~
NOTE
• When the product is started for the first time,
Auto is set as the fan speed. In Auto mode, the
fan speed is adjusted automatically according to
the air quality level of the indoor air.
• The fan speed is displayed on the display panel
when it is adjusted. The indication of fan speed
increases by 2 columns at a time. It is displayed
as below when the fan speed is set to Medium.
Using the Extra Functions
Using the Sleep Mode
This mode reduces the operating noise and lights
of the product so you can use it while you sleep.
1
Press the Start/Stop button to turn on the
product.
2
Press the Sleep button.
NOTE
• The sleep mode icon is displayed on the display
panel.
• The whole display is turned off except for the
display of Sleep mode.
• Fan speed can be adjusted by pressing the
Speed button while the Sleep mode is activated.
Publicidad
