BEARWARE 306609 Manual página 10

Thank you for purchasing a BEARWARE product. Please read the following quick
guide carefully so that you can enjoy your purchased device for a long time.
1. Scope of delivery
• Bell transmitter (incl. CR2016 batteries)
• Bell receiver
• Operating instructions
2. Technical data
Frequency range
max. transmission power
(e.i.r.p)
Transmission range
Power supply
Features
3. Additional information about this product
• The supplied transmitter is paired with the receiver and set to the standard
ringtone. If the devices are not paired, please read the „Pairing" chapter to
pair the transmitter with the receiver and set your desired ringtone.
• It is not recommended to mount the transmitter on metal surfaces as the
material can block the radio signals between the transmitter and receiver.
However, if this is the only option, we recommend that you use the sup-
plied adhesive pad instead of the supplied screws.
• The operating range will be reduced if the battery in the transmitter has a
low charge level.
• It is not advisable to mount the transmitter directly outdoors without
protection, as this could accelerate the ageing of the plastic.
10
433.05 MHz - 434.79 MHz
4.36dBm
up to 30m (without obstacles)
• Transmitter: 2x CR2016
• Receiver: 230V 50Hz
• Numerous ringtones
• variable volume
English