Publicidad
Idiomas disponibles
Idiomas disponibles
1. Remaining battery percentage
2. Remaining charge/ discharge time
3. Over temperature warning
4. Low temperature warning
5. DC output
6. USB-A output
7. USB-C output
8. AC output
9. Wi-Fi connection status
10. Battery pack connected
11. Battery pack failure
12. PV charge
13. Quick charge
14. Slow charge
15. Car charge
16. Fan status
17. Overload
18. Input power
19. Bluetooth
20. Output power
21. Error code
Battery capacity: when the power station is being charged, the remaining battery percentage (1.) will flicker.
Wi-Fi connection status: The flickering icon indicates that the power station is ready for pairing. The icon will
keep flickering if a mobile phone and power station are connected by hotspot. After a successful network
connection, the icon will always be on. If the connection fails, the icon will be off.
Use
1. Press the main power switch to turn on the device; the screen and the power indicator will light up.
2. If no operation is performed on the power station for 5 minutes, the power station will enter a hibernation
state, and the LCD screen will automatically turn off. When there is a load change or operation on the
power station, the LCD screen will automatically light up. Press the main power switch to turn on or turn
off the LCD screen.
3. Press and hold the main power switch to turn off the power station.
4. In normal mode (when the power is above 5%), the default standby time of this product is 2 hours. When
the AC output switch is not turned on, and there is no charge or discharge for 2 hours, the product will
automatically shut down. The standby time can be set on the APP. When the power is 5% or below, the
product will be forced to enter low power mode. In the case of no charge or discharge, the product will
adjust the standby time according to the power and automatically shut down.
Publicidad
