Publicidad
Idiomas disponibles
Idiomas disponibles
Display and Control Panel
Using the Control Panel
1. Enables the setting of the freezer.
2. Enables the setting of the cooler.
3. Freezer set value screen.
4. Cooler set value screen.
5. Economy mode symbol.
6. Super freeze symbol.
7. Alarm symbol.
Operating your Fridge Freezer
High temperature alarm
The alarm activates when you plug the appliance for the first time.
Freezer compartment
The alarm activates when the temperature in the appliance is too high.
During the alarm:
• the display shows blinking E09 error code,
• the alarm indicator flashes,
• the acoustic alarm beeps.
Turning off the alarm
• Press any key on the control panel to turn off the alarm. The maximum temperature
reached by the compartment appears on the display and then it is replaced by the set
temperature. The alarm indicator flashes until the temperature is restored.
• Alarm beeping turns off automatically after 1 hour. Alarm indicator blinks and error code
remains on the display.
• If the appliance is back to the set temperature, the alarm turns off and the normal display
restores. Check if the food inside is not spoiled or thawed. If yes, refer to the "Thawing"
section.
Refer to the "Temperature regulation" section to set the each compartment temperature.
Once you have plugged in the product, all symbols will be displayed for 2 seconds and the
initial values will be shown as -18 °C on the freezer adjustment indicator, and +4 °C on the
fridge adjustment indicator.
Lighting (If available)
When the product is plugged in for the first time, the interior lights may turn on 1 minute
late due to opening tests.
Freezer Temperature Settings
• The initial temperature value for the freezer setting indicator is -18 °C.
• Press the freezer set button once.
When you first press the button, the previous value will blink on the screen.
3
1
EN -14-
5
6
2
7
4
Publicidad
