Publicidad
Idiomas disponibles
Idiomas disponibles
Precautions
∫Lens Care
≥ This lens has a dust-proof and splash-proof
construction. When using it, please be careful of
the following.
If the lens is not working properly, consult the
dealer or your nearest Service Center.
– Please attach the lens to a dust-proof and
splash-proof digital camera.
– When detaching the lens from the digital camera,
take care to ensure that sand, dust, splashes of
water etc., do not get into the lens or the
terminals.
– This lens is not waterproof and cannot be used to
record underwater. For splash-proofing, the lens
is constructed to resist the entry of water. If
splashes of water etc. do adhere to the lens, wipe
after use with a soft dry cloth.
≥ To improve the dust-proofing and splash-proofing
of this lens, a lens mount rubber is used in the
mounting portion. After changing the lens a
number of times, you may find that the lens mount
rubber has marked the mount portion of the digital
camera body, which does not affect its
performance.
For information on changing the lens mount
rubber, contact your nearest Service Center.
4
VQT4G28
≥ Do not press the lens with excessive force.
≥ When there is dirt (water, oil, and fingerprints, etc.)
on the surface of the lens, the picture may be
affected. Lightly wipe the surface of the lens with a
soft, dry cloth before and after taking pictures.
≥ Do not place the lens mount
facing downwards. Do not
allow the lens contact points
1 to become dirty.
∫ About Condensation
(Fogging of the Lens)
≥ Condensation occurs when there are differences
in temperature and humidity as described below.
Condensation can cause the lens to become dirty
and lead to mold and malfunctioning, so exercise
caution in the following situations:
– When the camera is brought indoors from outside
during cold weather
– When the camera is brought into an air-
conditioned car
– When cold air from an air conditioner is directly
blown onto the lens
– In humid places
Publicidad
