Alesis DM10 MK II PRO Guia Del Usuario página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

(F2) Beat Check
Beat Check mode evaluates your sense of time and how accurately you play along with the
metronome. To use Beat Check:
1. Press Coach to enter Coach mode, then press F2-Beat to enter Beat Check.
2. To select a parameter that you want to edit, use the
Down and Up buttons: Beat Type (001–015, see
right), Score (turns on or off the score function, which
grades your performance), and Measure Hint (turns
on or off the accent hint). To change the setting or
value, use the dial.
3. Press Play/Stop to start practice. The display will show the accuracy of your playing,
indicating if you are behind, on, or ahead of the beat.
4. Press Play/Stop again to stop practice.
(F3) Change Up
Change Up mode helps you practice changing rhythms while still maintaining accurate time.
To use Change Up:
1. Press Coach to enter Coach mode, then press F3-Change to enter Change Up.
2. To select a parameter that you want to edit, use
the Down and Up buttons: Beat Type (001–003,
see right), Score (turns on or off the score
function, which grades your performance), and
Measure Hint (turns on or off the accent hint).
To change the setting or value, use the dial.
3. Press Play/Stop to start practice. The display will show the accuracy of your playing,
indicating if you are behind, on, or ahead of the beat.
4. Press Play/Stop again to stop practice.
Utility
The Utility menu lets you configure various settings for the module itself. Press the Utility
button to enter the Utility menu, and use the Down and Up buttons to select from the options
below. Press Exit to return to the previous page.
Master Effect
Use this page to adjust the Master EQ and Master Compressor effect settings. These will be
applied to all kits and songs. See
more.
Master Setup
Use this page to adjust the MIDI and Power settings.
Soft Through: Allows the MIDI In data to be passed through to the MIDI Out.
Local Control: When activated (On), playing the pads connected to the drum module will
trigger the drum module's internal sounds. When deactivated (Off), playing the pads will
send MIDI notes from the drum module to a connected computer or MIDI device.
12
Appendix > Effects Parameters > Master Effects
to learn

Publicidad

Tabla de contenido
loading

Tabla de contenido