Bergstrom COMPACT 1.4 Guía De Solución De Problemas página 15

COMPACT 1.4
• Connect or replace the power cable fuse.
• Replace electronic control.
• Check and correct possible bad contacts, breakages or disconnection of the power cable.
• Connect or replace the electronic control power supply fuse (for access the internal air
distribution panel must be removed).
• Check and correct the position of the connection cables to power supply (24V - Az / 12V - R
with fuse 24V - 25A / 12V - 50A a + and M a -).
!
(If the error persists contact an Authorised Service Centre).
• Check and correct possible bad contacts on terminals or cables of the return air probe.
• Connect or replace return air probe.
!
(If the error persists contact an Authorised Service Centre).
• Check and correct any possible poor contacts in connections or terminals of the power cable.
• Charge or replace the battery.
!
(If the error persists contact an Authorised Service Centre).
Solution
15
EN