Descargar Imprimir esta página

Bestron PURE&CLEAN AVC850A Manual De Instruccion página 20

Ocultar thumbs Ver también para PURE&CLEAN AVC850A:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
CLEANING AND MAINTENANCE - Cleaning the housing
1. Do not clean the vacuum cleaner during charging. Remove the adapter from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
WARNING:
Never immerse the appliance, plug or power cord in water.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
CLEANING AND MAINTENANCE - Cleaning the turbo nozzle
1. Remove the turbo nozzle from the vacuum cleaner. Push the button (1) at the top of the tube connection
and pull the turbo nozzle out.
2. Unlock the locking plate at the bottom of the turbo nozzle housing by sliding the slider outwards (see
figure 6).
3. Remove the rotating brush from the turbo nozzle (Figure 6) and clean the rotating brush.
4. Put the rotating brush back into the turbo nozzle.
5. Mount the locking plate and lock it by sliding the slider inwards.
CLEANING AND MAINTENANCE - Cleaning or replacing the filter
For best results clean or replace the filter after every second or third use of the vacuum cleaner, or more
frequently if the filter is visibly blocked.
WARNING:
Clean the filter regularly to avoid that the filter becomes clogged and the engine overheated.
1. Do not clean or replace the filter during charging. Remove the adap-ter from the wall socket.
2. Remove the tube from the vacuum cleaner.
3. Remove the waste from the dust container (see "Removing waste from the dust container").
4. Remove the dust container from the vacuum cleaner by pressing the release button (see figure 7A) and
taking out the dust container (figure 7B).
5. Turn the upper lid and remove it from the dust container (figure 7C).
6. Take the dust separation system and filter from the dust separation system (figure 7D).
7. Rinse the filter and the dust separation system thoroughly in lukewarm water.
8. Allow the filter to dry thoroughly.
9. Mount the holders and filters in the reverse sequence.
WARNING:
Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
Do not clean the filter in a washing machine.
Do not dry the filter with a hairdryer.
20
20
EN
EN

Publicidad

loading