JAP FUSIONESCO FORCE BLEND F3 Manual Del Usuario página 21

CHANGING BLADES
Disassemble the spiralizer step by step. Be careful not to cut yourself.
1. Pull the assembled parts out of the measuring cup. (FIG 1.)
2. Pull the drive unit out of the hopper (FIG 2.)
3. Detach the drive unit holder by turning it counter clockwise (FIG 3.)
4. Pull out the hopper and safely remove the blade clip. (FIG 4.)
5. Pull out the blade and replace it with another one. (Thin, thick or ribbon.)
6. Reinsert the blade clip and make sure it's closed. (FIG 5.)
7. Reassemble all parts back to the original state. (FIG 6.)
FIG 1.
FIG 4.
FIG 2.
21
FIG 6.
FIG 5.
FIG 3.