Publicidad
Idiomas disponibles
Idiomas disponibles
T(I PLAY A DVD RECORDED
IN DOLBY
DIGITAL SURROUND
This receiver
has the 5.1 INPUT connectors
supporting
Dolby
Digital decoder
with the 5,1 ch output terminals.
When a DVD
player that contains
a Dolby Digital decoder
is connected
to the
receiver, you can enjoy theater-quality
audio right in your home
when playing discs recorded
in Dolby Digital Surround.
1 Press the VIDEO 1/5.1 CH button to select the
VIDEO 1 (DVD or MD) function.
2 Press the VIDEO 1/5.1 CH button again.
"5.1
CH"
appears
on the
display
and the
DVD
player
connected
to the 5.1 INPUT terminals
is selected as a source,
3 Start playing the DVD recorded in Dolby Digital
Surround.
To resume the VIDEO 1, DVD (2 ch stereo) or MD function,
press
the VIDEO
1/5.1 CH button again.
m
The 5.1 CH function
is automatically
canceled
and the VIDEO
1, DVD or MD function
is selected:
- when the Dolby Pro Logic is turned on
- when headphones
are plugged
in
The 5.1 CH function
cannot be selected
while headphones
are
plugged
in.
RECORDING AN AUDIO SOURCE
1
2
3
TAPE< MONITOR
1
Select the program source to be recorded.
Press one of the function
buttons,
Set the tape deck or MD recorder to the recording
mode.
Start the selected program source.
To monitor recorded sound during recording
(wheln
the
connected tape deck is a three-head
system)
Press the TAPE MONITOR
button. "TAPE ON" appears
cm the
display for four seconds,
and then the source name selected
in
step 1 comes back on. To cancel the tape monitor, press it again
so that "TAPE OFF" appears.
m
Any sound controll system has no effect on recording
(see page
7).
m
Input
sound
through
the 5.1 INPUT
terminals
cannot
be
recorded.
When
recording
the sound
from the DVD player,
connect the AUDIO OUT (DOWN MIXING) terminals
of the DV[)
player to the VIDEO l/DVD/MD
AUDIO IN terminals
of the unit.
ENGL/S,H
1
I()
Publicidad
