PowerA LUMECTRA 1522807-01 Manual De Usuario página 4

CONTENTS
• Enhanced Wireless Controller for Nintendo Switch with Lumectra
• 10 ft. (3 m) USB-A to USB-C Cable
• Quick Start Guide
PAIRING
NOTE: Please ensure your Nintendo Switch is using the most recent system update for optimal
compatibility with PowerA Wireless controllers. Check your Nintendo Switch system for any updates
via "System Settings" on the HOME menu.
4
1. Select "Controllers" on the HOME menu.
2. Select "Change Grip/Order"
NOTES:
• Do not touch the Left Stick or Right Stick when pairing your controller.
• After the controller is paired with a Nintendo Switch system, it will auto-connect again when the system and
controller are powered ON.
• Up to eight wireless controllers can be connected to a Nintendo Switch system at the same time. The maximum
number of controllers that can be connected will vary depending on the type of controllers and features that are used.
• A maximum of two wireless controllers can be connected to a Nintendo Switch system while using Bluetooth
audio. To pair additional wireless controllers, disconnect the Bluetooth audio device.
• Pressing the SYNC Button while connected will turn the controller off.
• This controller can be used when the Nintendo Switch is docked or undocked.
• This controller does not support HD rumble, IR camera, or amiibo™ NFC.
3. Once on the pairing screen pictured,
hold down the SYNC button on
the controller for at least
three seconds. The
player LEDS will cycle
from left to right
to indicate the
controller is in
pairing mode.
4. A "Paired" message will appear when the
controller is connected. Press the A button to end
the process.
®