Publicidad
Idiomas disponibles
Idiomas disponibles
Set up a feeding schedule
① Set the current standard time
The default time setting at startup is 00:00. Please set
the standard time and synchronize it with the local time.
◎Unlock the screen: Press and hold the ▼ button for 6
seconds until you hear a "beep" to unlock the screen.
◎Enter the time setting mode: Press and hold the setting button for 3 seconds until the
number (hour) on the screen starts flashing.
◎Press the ▲ / ▼ button to adjust to the hour field you need.
◎Press the setting button to move to the minute field, and set the minute field in the same way.
◎After completing the setting, press the setting button again to confirm.
Note:
1.In the setting state, press and hold the ▲ / ▼ button to quickly increase the value without
repeating the operation.
2.Within 30 seconds of power-on and in the unlocked state, press and hold the "recording"
and "setting" keys at the same time for 6 seconds to switch between 12/24-hour system.
② Set the number of feedings per day
◎ After setting the standard time, press the Settings
button to enter the feeding setting mode.
◎The letter M will start flashing on the display. Use the
▲ / ▼ buttons to set the number of feedings per day.
The display will record the currently set number of meals. For example,
if the display shows"M 1 2 3 4" flashing, it means that
four meals per day have been set.
③ Set feeding time and portion for each feeding
◎ After setting the number of meals, press the
"Settings" button to enter the meal time setting mode.
The display screen will flash the current meal number
and feeding time.
For example,
If "M 1" is flashing, it means you are setting the first meal.
If "M 3" is flashing, it means you are setting the third meal.
06
Publicidad
