APETDOLA FD10 Manual Del Usuario página 8

a Set feeding time for each meal
◎ Press the "Settings" button and the hour field of the
time icon will start flashing.
◎ Press ▲/▼ buttons to set the hour field of the
feeding time.
◎ Press the "Settings" button again to move to the minute field.
Set the minute field in the same way.
b Set portion for each feeding
◎ After setting the feeding time, press the "Settings"
button again to enter the portion setting mode,
and the portion number will start flashing.
◎ Press ▲/▼ buttons to set the portion for each feeding.
The maximum portion is 20,and one portion of food is
approximately 10g±3g, or 1/8 cup = 2 tbsp.
c Complete the settings
◎ If needed, repeat the above steps to set the feeding time and portion for other meals.
For example, after setting the feeding plan for the first meal, press the "Settings" button to
start setting the plan for the second meal, and repeat the steps to set the feeding plan for
the third, fourth, fifth, and sixth meals until the plan for the last meal is set.
◎ Test: After completing the settings, press the feeding button twice to test if the food can be
dispensed properly. If the food can be dispensed smoothly, it means the product can operate
normally according to the set plan.
Manual feeding
◎ If you need to manually feed, first unlock the screen (long press
the ▼ button for 6 seconds until you hear a "drip" sound to
unlock the screen).
◎ Press the feeding button on the front of the feeder to feed one
portion each time. If you need to manually feed multiple portions,
simply press the feeding button multiple times while in unlocked state.
Note:
Manual feeding will not affect the feeding plan that has already been set.
07