Audio Configuration (Hdmi-Out); Windows Audio Setup For Hdmi - EUROCOM X7200 Panther 2.0 Manual Del Usuario

Audio Configuration (HDMI-Out)

As HDMI (High-Definition Multimedia Interface) car-
ries both audio and video signals you will need to con-
figure the audio output as per the instructions below.
HDMI Audio Support
Note that some NVIDIA video card models DO NOT sup-
port High Definition Audio through HDMI. When connect-
ing these video cards to an external display (using an
HDMI cable), it is recommended that you use a third party
video application (e.g. Power DVD) that provides appro-
priate audio decoding to play DVD's etc. Alternatively you
can output audio through an alternative source to the
HDMI connection.

Windows Audio Setup for HDMI

1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Sound (Hardware and Sound).
3. Click Playback (tab), and click to select Realtek Digital
Output.
4. Click Set Default (button).
5. Click OK to close the Sound

control panel.
Audio Setup for LCD Monitors/TVs with HDMI In-
put
Some LCD monitors/TVs support HDMI input, but DO
NOT have built-in digital audio decoders. Where this is
the case, when playing DVDs in Windows Media Play-
er/CyberLink Power DVD, a background noise can oc-
cur. If this situation does arise then please follow the
instructions below.
1. Click Start, and click Control Panel (or point to Settings and
click Control Panel).
2. Click Sound (Hardware and Sound).
3. Double-click Realtek Digital Output.
4. Click Supported Formats (tab).
5. Click to disable (remove the check in the box) DTS Audio and
Dolby Digital.
6. Click OK to close the Sound
Concise User's Guide
control panel.
Figure 12
Realtek Digital Output
HDMI Ports - 17