Publicidad
Idiomas disponibles
Idiomas disponibles
18V CORDLESS CUTOFF TOOL
SFMCM300
Congratulations!
You have chosen a STANLEY FATMAX tool. Years of experience,
thorough product development and innovation make STANLEY
FATMAX one of the most reliable partners for professional
power tool users.
Technical Data
Voltage
Type
Battery type
No‑load/rated speed
Wheel diameter
Wheel thickness (max)
Spindle diameter
Spindle length
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN60745‑2‑22:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
=
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However,
if the tool is used for different applications, with different
accessories or is poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the
job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC‑Declaration of Conformity
o
Machinery Directive
18V Cordless CutOff Tool
SFMCM300
SFMCM300
STANLEY FATMAX declares that these products described under
V
18
DC
Technical Data are in compliance with:
1
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-
Li‑Ion
22:2011+A11:2013.
min
20000
‑1
These products also comply with Directive 2014/30/EU and
mm
76
2011/65/EU. For more information, please contact STANLEY
mm
2.2
FATMAX at the following address or refer to the back of
mm
10
the manual.
The undersigned is responsible for compilation of the technical
mm
43
file and makes this declaration on behalf of STANLEY FATMAX.
kg
0.94
dB(A)
98
Patrick Diepenbach
dB(A)
109
General Manager Benelux, GTS-Europe
dB(A)
3
STANLEY FATMAX Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
m/s
2
1.6
09.30.2023
2
m/s
1.5
STANLEY FATMAX declares that these products described under
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN60745-1:2009+A11:2010, EN60745-2-22:2011+A11:2013.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact STANLEY FATMAX at the
following address or refer to the back of the manual.
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
18V Cordless CutOff Tool
SFMCM300
ENGLISh
33
33
Publicidad
