Publicidad
Idiomas disponibles
Idiomas disponibles
1. PARTS AND COMPONENTS
Fig. 1
1. Top cover
2. Removable flat-grindstone system
3. Power switch
4. Coffee-amount adjustment knob (cups)
5. Ground coffee tank
6. Coffee bean hopper
7. Grinding-level adjustment knob
8. Main body
9. Feet
10. Cleaning brush
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
-
This device is packaged in a way as to protect it during transport. Take the device out of its
box and remove all packaging materials. You can keep the original box and other packaging
elements in a safe place. This will help you prevent product damage when transporting it in
the future. In case the original packaging is disposed of, make sure all packaging materials
are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
-
Place the device on a flat, stable, and dry surface.
3. OPERATION
1. Place the flat grindstone system inside the coffee bean hopper. Make sure the indicator
arrow points to the "Unlock" mark, then turn the flat grindstone system until the indicator
arrow points to the "Lock" mark. Turn the flat grindstone system in the opposite direction
to remove it. Fig. 2
2. Fill up the coffee bean hopper without exceeding the MAX mark. Refit the cover.
3. Refit the top cover. There is a safety switch inside the device, so the latter will not turn on
if the cover is not securely in place and pressing the safety switch. Fig. 3
ENGLISH
STEELMILL 2000 ADJUST
25
Publicidad
