Publicidad
Idiomas disponibles
Idiomas disponibles
23. Power Limit function
* When the unit is on and in the cool or heat mode, press and
hold the "Mode" button for 5 seconds to enter the power
limit function. The temperature area will display and flash
the "C1" character, if no operation is confirmed automatically
after 5 seconds.
* After entering this function, press the "Mode"button only to
adjust this function, and the mode cannot be switched. The
switch type of the power limit function is "C1-C2-C3-set
temperature (without limiting power)". After each adjustment
of the power limit function, the Cx (Cx is C1/C2/C3)
character flashes continuously for 5 seconds and then is
confirmed automatically.
* Under the power limit function, the functions of "I-FEEL",
"ECO" and "8℃ heating" are invalid;
When the set temperature is adjusted, the set temperature
is displayed constantly for 5 seconds and then the display
of Cx is restored (Cx is C1/C2/C3).
* Turn off the unit and switch the mode to exit the power
limit function.
CHANGING THE BATTERIES
1.Slide to open the battery cover according to the direction
indicated by the arrowhead.
2.Insert two brand new batteries (7#), and position the batteries
to the right electric poles (+＆ ).
3.Put back the battery cover.
-
129
3
Publicidad
