Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
2. Remove the lock nut (G) from hose guide (F). Mount
the hose guide (F) into the far-right hole in the sink.
Secure the hose guide (F) underneath the sink using
the lock nut (G) and hand tighten. Do not overtighten.
3. Install the side spray:
a. Insert the side spray (E) down through the hose
guide (F) and into the sink.
b. From underneath the sink, push the preassembled
hose connector (H) firmly upward and snap onto
the block (D).
c. Pull down moderately to ensure the connection
has been made.
4. Making the water supply connections:
Use 1/2 in. I.P.S. faucet connections (2), or use supply
line coupling nuts (3) (not included) with a 3/8 in. O.D.
ball-nose riser (1). Do not overtighten.
2
3
4
1
3
4
G
D
H
2
F
E
F
Publicidad
