Sony CDP-XA7ES Manual De Instrucciones página 11

ee
Locating a Specific Track
You can quickly locate any track while playing a disc
using the IKI />f1 (AMS: Automatic Music Sensor)
buttons or number buttons.
KK/D>D>1 Number buttons > >12
MUSIC SCAN
Number
buttons
>20
Heed />P}
To locate Press
The next or Dt repeatedly until you find the
succeeding tracks track
The current or IKK repeatedly until you find the
preceding tracks track
A specific track Number button of the track
directly
By scanning each MUSIC SCAN before you start playing
track for 10 seconds _ or while playing a disc. When you find
(Music Scan) rt the track you want, press B> to start
playing.
O When you directly locate a track numbered over 12
(or 20 when using the remote)
Press >12 (or >20 on the remote) first, then the
corresponding number buttons. To enter "0," use button
10.
Example: To play track number 30
Press >12 (or >20 on the remote) first, then 3
and 10.
ov You can extend the playing time during Music Scan [¥]
Press MUSIC SCAN repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Playing CDs
Track
You can also locate a particular point in a track while
playing a disc.
INDEX t/t
To locate a point Press
While monitoring the PP (forward) or <4 (backward)
sound and hold down until you find the
point
Slowly by monitoring </P> SLOW on the remote and
the sound ri hold down until you find the point
Quickly by observing </P> and hold down until you
the display during find the point. You will not hear the
pause sound during the operation.
Using an index (only INDEX t= /=—™ on the remote
for indexed discs) repeatedly until you find the point
Key What is an index?
It is a number that divides a track or a disc into sections,
enabling you to easily locate a desired point. You can
determine if a disc uses indexes by its packaging.
Note
If "74" appears in the display, the disc has reached the end
while you were pressing PP. Press 4 or KK to go back.