Pre-Installation
NOTE: This sink can be handicapped installed. To comply with the
ADA requirements, the sink shall be installed at 34 inches (865mm)
height maximum measured from the oor to top of front rim.
PLANNING INSTALLATION
Before beginning installation of this product, ensure all parts are present. Compare parts with the Hardware Included and Package Contents
sections of this manual. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact customer
service for replacement parts.
If you have a marble or stone countertop that does not have a cutout to accommodate the sink, it is recommended this be done by a professional.
Install so future removal is possible. Do not use adhesives or adhesive sealant. This will avoid damage to the top.
Estimated Assembly Time: 60 minutes + epoxy setting time (4-8 hours)
NOTE: It is recommended to check the desired location for clearance
between the backsplash, faucet, plumbing, and vanity.
TOOLS REQUIRED
NOTE: You may require different, more specialized tools to install this
lavatory to countertop materials other than wood or wood composites.
Safety
glasses
Carpenter
level
Pencil
Pipe
wrench
Drill
Drill
Sealant
Phillips
screwdriver
Expoxy
3
5/16 in. Diamond
drill bit
Putty
knife
Flat blade
screwdriver
Cellophane
tape
Please contact 1-855-434-5224 for further assistance.
Scroll saw
Measuring
tape
Adjustable
wrench
HOMEDEPOT.COM