Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
4
Mounting the sink
With the countertop positioned upside-down, center the
sink (A) over the cutout.
Firmly press the sink (A) onto the countertop, and
immediately wipe off excess sealant.
Attach the undermount clips (AA) to the threaded knurl (BB)
in the countertop using the machine screws (CC) and
washers (DD) to hold sink (A) in place.
Allow the sealant to set for 30 minutes before proceeding.
Flip the countertop right-side up, and install it onto the
cabinet.
5
Installing the drain and plumbing
Install the drain (not provided) according to the
manufacturer's installation instructions.
CAUTION: Do not overtighten the drain assembly. This
may cause the bowl to forcefully crack during installation
or at some time in the future.
Install the waste system, faucet, and the water supply
(not provided) according to the manufacturer's installation
instructions.
Check for leakage.
CC
DD
AA
BB
6
A
Publicidad
