Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING
All surfaces of your Saunders at home Lumbar Traction device may be cleaned with
a mild detergent or disinfectant Do not immerse the device in water The carrying
case should be left in the "open" position to air dry If the device is transferred
between different users, all surfaces should be cleaned using standard cleaning
techniques paying particular attention to the components that come in contact with
the body
STORAGE
Your Saunders at home Lumbar Traction device should be stored in its protective
case Replace the pump in the mesh storage compartment on the inside of the
carrying case Fold all harnesses, closing buckles where applicable Fully zip the
carrying case
TROUBLESHOOTING
The Saunders at home Lumbar Traction device features a very accurate, sensitive
gauge The pump is specifically designed not to leak in the "HOLD" position If you
notice a drop in the gauge reading when in the "HOLD" position, it is probably
because you have relaxed or moved slightly If this happens, return to the "PUMP"
position and pump back to the desired force, then reset to "HOLD " Proper operation
of the Saunders Lumbar Traction device requires that the air system be virtually
leak-free If the traction force is not maintained, there may be a leak somewhere in
the system Please contact the service team if this is noticed
QUESTIONS TO ASK YOURSELF BEFORE INITIATING THE THERAPY:
•
Is the pump in the "PUMP" position when pumping?
•
Is the pump in the "HOLD" position when receiving treatment?
•
Are you lying still? (Any movement will cause fluctuation )
•
Are you pumping slowly?
•
Are all connections tight? (i e pump hose cap and gauge lens cap)
ENGLISH
11 / 43
Publicidad
