MESTIC MKK-400 Instrucciones De Uso página 9

Storage
1. Always let the heater cool down completely before storing it.
2. Never wrap the cord around the heater.
3. Store the appliance in a dry and dust-free environment.
Maintenance & cleaning
1. Before cleaning the appliance, let it cool down and unplug it.
2. Never immerse the appliance in water or clean it under running water.
3. Dust off the grilles
4. Using a damp sponge with water, clean only the housing of the appliance, after which you dry it with a dry cloth.
5. Make sure that no water gets into the control panel or the openings in the housing.
6. Do not use abrasives or sharp objects to clean the oven, as this may scratch the oven body.
7. Before switching on and using the heater again, let all parts and the surface dry very well.
Fall protection
This heater features mechanical fall protection. This protection ensures that if the heater is not placed upright on a firm
and level surface or if the heater falls over, the system automatically shuts the heater down. If this happens, place the
heater on a firm and level surface and restart the heater.
Overheating protection
The heater features overheating protection. When a potential overheating temperature is reached, the system
automatically switches off the heater.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means
that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or
dismantled to minimize its impact on the environment. For further information, please contact your local
or regional authorities. Electronic products not included in the selective sorting process are potentially
dangerous for the environment and human heath due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MKK-400, applies all basic requirements and other relevant
regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive
(2014/35/EU). If you require a full declaration of conformity, you can contact the address listed on the backside of this
manual.