Infiniton CMPY-BIS9N Manual Del Usuario página 24

Installation
INSTALLATION (VENT OUTSIDE)
MOUNTING OF THE V-FLAP
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts to its body.The
images only show an example of how to mount the V-flap, because the outlet may vary according to
different models and configurations.
To mount the V-flap 1 you should:
Installing the cooker hood
If you have an outlet to the outside, your cooker hood can be connected as below picture by means of
an extraction duct (enamel, aluminum, flexible pipe or non-flammable material with an interior
diameter of 150mm)
1. Before installation, switch off the unit and unplug it from the mains socket.
1. Mount the two half parts (2) on the body (6).
2. The pin (3) must be facing upwards.
3. The shaft (4) must be inserted into the holes (5) of the body;
4. Repeat all operations for the other half of the flap.
24
English
infiniton.es