Infiniton CMPY-BIS9N Manual Del Usuario página 34

Maintenance and cleaning
Bulb replacement
IMPORTANT!
Note: Before changing the lights, make sure that the appliance isturned off and unplugged.
Protect against danger when changing lights, such as wearing gloves.
To change the cooker hood lights, follow the steps below:
Remove the grease filter.
Use a tool or the hand to press the spring splinter of both sides of LED light to the inside, until the light is
pressed out.Then slightly pull the light connecting wire out and replace the lights.
Apply the reverse procedure to install the light back.
ILCOS D code for this lamp is: DSR-1-S-41
– LED modules– round lamp
– Max wattage: 2×1W
– Voltage range: DC 4V
– Dimensions:
The bulb must be replaced by the manufacturer, its service agent or
similarly qualified persons.
Always switch off the electricity supply before carrying out any operations
on the appliance. When handling bulb, make sure it has completely cooled
down before any direct contact with hands.
When handling bulbs hold with a cloth or gloves toensure perspiration does
not come in contact with the bulb as this can reduce the life of the bulb.
34
English
infiniton.es