Infiniton CMPY-BIS9N Manual Del Usuario página 27

Installation
English
7. Fit the angle brackets to the three assembled angles. Then use 6 M4X10 screws, an M4 nut and a was-
her to fix them. See picture 6
8. Place the inner chimney on the extractor hood housing. See picture 7.
9. Install the unit and remove the expansion pipe from the ceiling. Then, using 6 M4X10 screws, an M4 nut
and a washer, fix the angle of the unit to the hood. See photo 8.
27
infiniton.es