Publicidad
Idiomas disponibles
Idiomas disponibles
Control panel
1- Current pressure
2- Set pressure
3- On/off button
4- High speed ("Fast")/low speed ("Silence") mode
5- Number of hours worked
6- Current speed
7- Decreasing the value
8- Increasing the value
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%. Place the unit
in a way that ensures good air circulation. Maintain a minimum clearance of 10 cm from any wall of the unit.
Keep the unit away from any hot surfaces. Always operate the unit on a level, stable, clean, fireproof, and dry
surface and out of the reach of children and persons with impaired mental, sensory, and intellectual
functions. Place the unit in such a way that the main plug can be reached at any time. Ensure that the power
supply to the unit corresponds to that specified on the identification plate!
3.3.
Installation of the unit
1) After removing from the carton, pull out the plug.
EN
Publicidad
