Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Operations
Switching the FM/AM Tuning
Step
Set the FM/AM tuning step of your country or
region.
1
Press HOME, touch [Settings] [General]
[Tuning Steps], then set the FM/AM tuning
step.
2
To exit the setup menu, touch
three times.
Pairing with a BLUETOOTH Device
When connecting a BLUETOOTH device for the first
time, mutual registration (called "pairing") is
required. Pairing enables this unit and other devices
to recognize each other.
1
Press HOME, then touch [Settings]
[Bluetooth] [Bluetooth Connection] [ON]
[Pairing].
flashes while the unit is in pairing standby
mode.
2
Perform pairing on the BLUETOOTH device
so it detects this unit.
3
Select your model name shown on the
display of the BLUETOOTH device*.
When pairing is made,
* If passkey input is required on the BLUETOOTH device,
input [0000].
Canceling the Demonstration
Mode
1
Press HOME, then touch [Settings].
2
Touch [General], then touch [Demo] to set to
[OFF].
3
To exit the setup menu, touch
twice.
6
EN
(back)
stays lit.
(back)
Updating the Firmware
To update the firmware, visit the support site, then
follow the online instructions.
Customers in Latin America:
https://www.sony.com/am/support
Customers in Asia Pacific and Middle East:
https://www.sony-asia.com/support
Note
During the update, do not remove the USB device.
Publicidad
